It’s that time of year again, when rain, snow, and changing temperatures cause potholes to form, wreaking havoc on roadways, parking lots, and driveways. According to the American Automobile Association (AAA), pothole damages cost U.S. motorists roughly $3 billion per year. On a per-pothole-incident basis that comes out to about $300 per driver. Additionally, AAA reports two-thirds of U.S. drivers are concerned about potholes on local roadways.
No asphalt or concrete surface will last forever, but it is easy to prolong the life of your association’s pavement. Community association managers and boards of directors have several pavement maintenance and repair options from which to choose.
Crack Filling
Cracks in the asphalt should be cleaned of dirt and vegetation and allowed to dry completely before filling. Cracks should be filled with emulsified asphalt slurry or a light grade of liquid asphalt mixed with fine sand.
Asphalt Patching
Patching is done in areas with severe alligator cracks and/or potholes. When the patch is cut out, the sub-base material should be examined and compacted thoroughly before patching. The patch should be tack coated, to ensure firm bonding between the old and new surfaces. Base course material is laid and compacted first, and new surface asphalt is laid and compacted on top of that. The patch should be rolled to a smooth finish, and all edges should be coated to minimize water penetration.
Overlays
Overlays are placed over existing asphalt to create a new surface. In recent years paving fabric, placed on the existing asphalt prior to the overlay, has gained popularity as an effective agent to bond the new asphalt to the existing asphalt surface. Once the existing asphalt has been prepared, the paving fabric is laid down and a new surface quality asphalt is laid over it. It is then rolled to a smooth finish to match existing grades of asphalt.
Sealcoating
Sealcoating is a controversial aspect of asphalt maintenance. Generally, sealcoating provides an additional 2-3 years of protection against the elements and use by providing an additional layer of protection. It is also cosmetic, in that it covers old and new asphalt to create a uniform look in the community and increases curb appeal. Sealcoating is best done approximately one year after a new surface has been laid. It should be applied by the squeegee method if possible to ensure the sealing of cracks too small to fill by the traditional method.
For more information on repair road and paving, check out The Road Repair Handbook, available for purchase at CAI Press.
The post Pothole Patrol: What community associations can do to maintain pavement appeared first on Ungated: Community Associations Institute Blog.